We have updated our data protection policies based on new GDPR act. See Details
You are viewing products available in Westburne all division.
Change
Contact your local branch to check product availability.
Log In
to view your price and product availability
Contact your sales representative to confirm availability.
EA
Min: 1 EA , Multiple 1 EA
Technical Documents
Technical Documents
Product Details
Product Details
71A8107001DB 150W S55 120V KIT
Reliable performance Vacuum-pressure impregnation is used to re-enforce the electrical insulation of the ballast, preclude moisture, inhibit noise, and dissipate heat;Pre-insulated voltage leads reduce the risk of shock and shrink installation time The basic ballast is the open core and coil which is most often used as a component within a lighting luminaire. The core and coil also forms the nucleus of Philips Advance's five other ballast configurations. Vacuum-pressure impregnated with a silica-filled polyester varnish;All core and coil ballasts below 600W utilize a UL Class H (180ºC) insulation system;C and C ballasts 600W and higher utilize a UL Class N (200ºC) insulation system;Pre-insulated voltage leads;Ballast kits supplied with pre-wired ignitor High bay retail, manufacturing, gymnasiums, warehouses, parking structures, outdoor
Reliable performance Vacuum-pressure impregnation is used to re-enforce the electrical insulation of the ballast, preclude moisture, inhibit noise, and dissipate heat;Pre-insulated voltage leads reduce the risk of shock and shrink installation time The basic ballast is the open core and coil which is most often used as a component within a lighting luminaire. The core and coil also forms the nucleus of Philips Advance's five other ballast configurations. Vacuum-pressure impregnated with a silica-filled polyester varnish;All core and coil ballasts below 600W utilize a UL Class H (180ºC) insulation system;C and C ballasts 600W and higher utilize a UL Class N (200ºC) insulation system;Pre-insulated voltage leads;Ballast kits supplied with pre-wired ignitor High bay retail, manufacturing, gymnasiums, warehouses, parking structures, outdoor
Technical Specifications
Technical Specifications
Sodium haute pression | |
| Poids du paquet UOM | LB |
|---|---|
| Approbation | UL 1029, CSA 22.2 |
| Size | 2 5/8 POUCE LONG X 3.6 POUCE LARGE X 2 3/16 POUCE HAUT |
| Température minimum de départ | -40 DEG F |
| Quantité de paquet(s) | 1 |
| Paquet UOM | EA |
| Volume du paquet UOM | PO |
| Courant entrant | 4.5 AMPERE (R-NPF), 2.4 AMPERE (R-HPF) |
| Type de circuit | R-NPF, R-HPF |
| La tension d'entré | 120 V |
| Nom du produit | HID BALLAST KIT |
| Hauteur du paquet | 2.19 |
| Contenus | BALLAST, CONDENSATEUR FILM SEC |
| Largeur du paquet | 3.6 |
| La puissance d'entré | 170 W |
|---|---|
| Numéro de catalogue | 71A8107001DB |
| Longueur du paquet | 2.63 |
| Type de lampe | SODIUM À HAUTE PRESSION |
| ANSI Code | S55 (TUBE A ARC 55 V) |
| Nom complet MFR | PHILIPS ADVANCE |
| Mfr UNSPSC | 39111801 |
| Poids du paquet | 4.1 |
| Type de paquet | CA |
| Wattage des lampes | 150 W |
| Code mfr | ADV |
| Volume du paquet | 20.7349 |
| Classe de fréquence | 60 HZ |
| Information supplémentaire | 2 5/8 INCH X 2 3/16 INCH REACTOR CORE WITH INTEGRAL IGNITOR |