We have updated our data protection policies based on new GDPR act. See Details
You are viewing products available in Westburne all division.
Change
Contact your local branch to check product availability.
Log In
to view your price and product availability
Contact your sales representative to confirm availability.
EA
Min: 1 EA , Multiple 1 EA
Technical Documents
Technical Documents
Product Details
Product Details
7695T150 TERMINATION KIT 1.05-1.80 IN
3M™ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5–35 kV, with tape shield, wire shield and UniShield® constructions.
Each kit contains sufficient quantities of material to make three single-phase terminations. The termination assemblies consist of a tubular insulator, high dielectric constant (Hi-K) stress control tube, conformable Hi-K stress controlling compound, and built-in environmental top seal. The insulator is made of a dark gray silicone rubber with advanced tracking resistant and hydrophobic properties. Note:Lugs need to be ordered separately. Exceptions:For T-150 Kits, 150 kV impulse level meets the impulse requirements for 35 kV class equipment where indoor terminations are used. 7620-T Kits are designed and assembled with stress controlling compound only.
3M™ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5–35 kV, with tape shield, wire shield and UniShield® constructions.
Each kit contains sufficient quantities of material to make three single-phase terminations. The termination assemblies consist of a tubular insulator, high dielectric constant (Hi-K) stress control tube, conformable Hi-K stress controlling compound, and built-in environmental top seal. The insulator is made of a dark gray silicone rubber with advanced tracking resistant and hydrophobic properties. Note:Lugs need to be ordered separately. Exceptions:For T-150 Kits, 150 kV impulse level meets the impulse requirements for 35 kV class equipment where indoor terminations are used. 7620-T Kits are designed and assembled with stress controlling compound only.
Technical Specifications
Technical Specifications
Kits de terminaison | |
| Code mfr | 3M |
|---|---|
| Numéro de catalogue | 7695-T-150 |
| MFR UNSPSC | 39121718 |
| MFR FULLNAME | 3M MARCHE ELECTRIQUE - PRODUITS ELECTRIQUES |
| PRODUCT NAME | KIT DE TERMINAISON DE CABLE |
| PKG WEIGHT | 6.4 |
| PKG WEIGHT UOM | LB |
| PKG TYPE | CA |
| PKG QTY | 1 x 1000 Mbps |
| PKG UOM | EA |
| PKG LENGTH | 17.8 |
| PKG WIDTH | 8.1 |
| PKG HEIGHT | 7 |
| PKG VOLUME | .584 |
|---|---|
| PKG VOLUME UOM | CF |
| Type | AJUSTEMENT A FROID |
| ADDITIONAL INFORMATION | NOMBRE DE CONDUCTEURS 1 |
| type de câble | BLINDÉ |
| Type d'isolant | TUBULAIRE |
| Grosseur du conducteur | 700 À 1500 KCMIL (5 KV), 600 À 1250 KCMIL (8.7 KV), 500 À 1000 KCMIL (15 KV), 250 À 800 KCMIL (25/28 KV) |
| VOLTAGE RATING | 5 A 25/28 KV |
| Accessoires d'isolateur | CAOUTCHOUC DE SILICONE |
| Nombre de raccordements | 3 |
| Mesure bil | 150 KV |
| Diamètre externe de l'isolation du câble | 1.05 A 1.8 POUCE |