We have updated our data protection policies based on new GDPR act. See Details
You are viewing products available in Westburne all division.
Change
Contact your local branch to check product availability.
Log In
to view your price and product availability
Contact your sales representative to confirm availability.
EA
Min: 1 EA , Multiple 1 EA
Technical Documents
Technical Documents
Product Details
Product Details
7696T150 TERMINATION KIT 1.53-2.32 IN
3M™ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5–35 kV, with tape shield, wire shield and UniShield® constructions.
Each kit contains sufficient quantities of material to make three single-phase terminations. The termination assemblies consist of a tubular insulator, high dielectric constant (Hi-K) stress control tube, conformable Hi-K stress controlling compound, and built-in environmental top seal. The insulator is made of a dark gray silicone rubber with advanced tracking resistant and hydrophobic properties. Note:Lugs need to be ordered separately. Exceptions:For T-150 Kits, 150 kV impulse level meets the impulse requirements for 35 kV class equipment where indoor terminations are used. 7620-T Kits are designed and assembled with stress controlling compound only.
3M™ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5–35 kV, with tape shield, wire shield and UniShield® constructions.
Each kit contains sufficient quantities of material to make three single-phase terminations. The termination assemblies consist of a tubular insulator, high dielectric constant (Hi-K) stress control tube, conformable Hi-K stress controlling compound, and built-in environmental top seal. The insulator is made of a dark gray silicone rubber with advanced tracking resistant and hydrophobic properties. Note:Lugs need to be ordered separately. Exceptions:For T-150 Kits, 150 kV impulse level meets the impulse requirements for 35 kV class equipment where indoor terminations are used. 7620-T Kits are designed and assembled with stress controlling compound only.
Technical Specifications
Technical Specifications
Individual Protection Equipment (I.P.E.) | |
| Cable Insulation Outer Diameter | 1.53 TO 2.32 INCH |
|---|---|
| Type | COLD SHRINK |
| Mfr UNSPSC | 39121400 |
| Mfrcode | 3M |
| Conductor Size | 1750 TO 2000 KCMIL (5 KV), 1500 TO 2000 KCMIL (8.7 KV), 1250 TO 2000 KCMIL (15 KV), 900 TO 1750 KCMIL (25/28 KV), 700 TO 1500 KCMIL (35 KV) |
| Product Name | INDOOR TERMINATION KIT |
| Additional Information | APPLICABLE STANDARD IEEE |
| Cable type | SHIELDED |
| Pkg Length | 19.1 |
| Voltage Rating | 5 TO 35 KV |
| Pkg Type | CA |
| Pkg UOM | EA |
| Bil Rating | 150 KV |
| Pkg Volume UOM | CF |
|---|---|
| Insulator Material | SILICONE RUBBER |
| Pkg Volume | 1.015 |
| Pkg Weight UOM | LB |
| Contents | (3) HI-K SILICONE RUBBER TERMINATION, (3) PRE FORMED GROUND BRAID, (3) CONSTANT FORCE SPRING, (6) MASTIC SEAL STRIP, (1) CABLE PREPARATION KIT, (1) INSTRUCTION SHEET |
| Pkg Qty | 1 |
| Catalog Number | 7696-T-150 |
| Pkg Weight | 8.3 |
| Pkg Width | 11.2 |
| Mfr Fullname | 3M ELECTRICAL MARKET ELECTRICAL PRODUCTS |
| Number of Terminations | 3 |
| Pkg Height | 8.2 |